ADEY Professional Heating Solutions

ADEY Magnaclean Micro2 Product Page

ADEY MagnaClean Micro2

Compact protection for hydronic heating systems


  • Ideal for ¾" copper and ¾" NPT iron pipework
  • Smallest servicing height in the industry – 1" clearance above and below
  • Compact profile for tight spaces
  • Rapid in-line installation
  • Ideal for baseboard and smaller installations (apartment units, family residences, etc.)
  • Integral flow-diverters ensure 360° distribution for uniform flow around magnets, maximizing sludge capture
  • Powerful permanent magnet
  • Captures non-magnetic debris
  • Quick-release trigger and rapid-fit connectors for servicing and re-installation in seconds
  • Rotating filter connections allow customizable installation options
  • Low-profile drain valve and built-in air vent for easier maintenance
  • Bi-directional flow – either port can be designated as entry port
  • Easy dosing of ADEY® treatment products via canister
  • Full-flow valves for minimal pressure drop

ADEY MagnaClean Micro2

Magnaclean Micro2 Video

close button
Magnaclean Micro2 Video

MagnaClean Demo Jar

How it works in minutes...

Watch the video

Magnaclean Micro2 - Recommendation

Recommendation

ADEY recommends fitting a filter to all new installations following a MagnaCleanse® to extend system life, reduce maintenance costs, improve heat efficiency and lower carbon emissions. Annual servicing is recommended using ADEY’s Best Practice™ system.

Magnaclean Micro2 Technical specification

Magnaclean® Micro2™ Technical specification details

Technical specification

Canister and Lid

  • Material: Glass reinforced nylon
  • Fluid capacity: 0.06 gallons
  • Thread: Pressure thread
  • Flow configuration: Bi-directional – Either port can be inlet
  • Main lid seal: EPDM

Magnet

  • Housing: Stainless steel
  • Length: 327/32"
  • Diameter: ¾"

Bleed Valve

  • Body material: Nickel plated brass
  • Screw: Nickel plated brass
  • Thread interface: Metric M6
  • Seals: EPDM

Drain port

  • Drain plug material: Nickel plated brass
  • Drain plug thread: Metric M8
  • Seals: EPDM

Triple seal valves

  • Body material: Nickel plated brass
  • Seals material: Long life PTFE ball seals
  • O ring material: EPDM 70 seals x 3
  • Valve inlet/outlet: ¾" compression
  • Valve inlet/outlet (with adapters): ¾" NPT female
  • Valve to canister: EPDM

Magnaclean Micro2 Installation

Magnaclean Micro2 Technical installation details

Installation

MagnaClean® Micro2™ has been developed by the industry leading and multi-award winning company that pioneered magnetic filtration. ADEY’s filters protect over three million heating systems throughout Europe removing virtually all of the damaging suspended black iron oxide sludge that builds up in all hydronic heating systems.

The dual-action filter can be installed anywhere on the main circuit. However, to achieve the best level of protection for the boiler or baseboard, it is recommended that MagnaClean Micro2 is fitted after the last radiator and before the boiler.

The following instructions are designed to support engineers in the safe and effective installation and servicing of MagnaClean Micro2 and should be followed at all times.

For help please refer to the FAQs or call ADEY toll free on 844 378 0442.

micro2 Installation Diagram 1
micro2 Installation Diagram 2
micro2 Installation Diagram 3
micro2 Installation Diagram 4
micro2 Installation Diagram 5
micro2 Installation Diagram 6
micro2 Installation Diagram 7
micro2 Installation Diagram 8
micro2 Installation Diagram 9
micro2 Installation Diagram 10

Magnaclean Micro2 Servicing

Servicing

micro2 Servicing Diagram 1
micro2 Servicing Diagram 2
micro2 Servicing Diagram 3
micro2 Servicing Diagram 4
micro2 Servicing Diagram 5
micro2 Servicing Diagram 6
micro2 Servicing Diagram 7
micro2 Servicing Diagram 8

Magnaclean Micro2 - Quick-release trigger Explained

Quick-release trigger information

Quick-release trigger

MagnaClean Micro2 incorporates a secure, quick-release, trigger which enables the filter to be removed and re-installed in seconds.

The industry leading connections are an integral part of the new MagnaClean Micro2 design. They enable easy and speedy filter removal during annual servicing or to undertake a MagnaCleanse system flush. This also makes it ideal for systems where there is little room to install a filter.

The following instructions are designed to support engineers in the safe and effective servicing of MagnaClean Micro2 using the quick-release trigger.

Magnaclean Micro2 - Customizable installation

Customizable installation options explained

Customizable installation

Small space? Not much clearance? Unusual pipe angles? No problem. The in-line design and rotating valves of MagnaClean Micro2 allow installers to customize the job to fit almost any space, for maximum flexibility and minimum hassle.

MagnaClean Micro2’s in-line design and 360° rotational valves provide multiple installation options for installers. This ensures greater flexibility within the tightest working environments.

Multiple installation options breakdown

Downloads:

MagnaClean Micro2 sales flyer MagnaClean Micro2 Installation and Servicing guide

Associated products:

MagnaCleanse® | ADEY Best Practice™ | Water Test Kits | MC1+ | MC3+

Information

For further information, water treatment advice, or information on the MagnaClean filter range call toll free on 844 378 0442 or email us via the contact us page.