ADEY Professional Heating Solutions

ADEY Magnaclean Professional2XP Product Page

ADEY MagnaClean Professional2XP

X-treme protection for large residential and light commercial hydronic heating systems


  • X-treme performance, large-capacity filter
  • Rapid in-line installation, featuring in-line inlet and outlet ports with bi-directional flow
  • Designed for larger heating systems (1" copper and 1¼" black iron pipes)
  • Integral flow-diverters ensure 360° distribution for uniform flow around magnets, maximizing sludge capture
  • Powerful permanent magnet
  • Also captures non-magnetic debris
  • Rotating filter connections allow customizable installation options
  • Low-profile drain valve and built-in air vent for easier maintenance
  • Tool-free valve connection, designed to prevent cross treading
  • Improved high-performance seals and bore size for greater flow and reliability
  • Bi-directional flow – either port can be designated as entry port
  • Easy dosing of ADEY® treatment formulas via canister
  • Full-flow valves for minimal pressure drop

ADEY MagnaClean Professional2XP

Magnaclean Professional2XP Video

close button
Magnaclean Professional2xp Video

MagnaClean Demo Jar

How it works in minutes...

Watch the video

Magnaclean Professional2 - Recommendation

Recommendation

ADEY recommends fitting a filter to all new installations following a MagnaCleanse® to extend system life, reduce maintenance costs, improve heat efficiency and lower carbon emissions. Annual servicing is recommended using ADEY’s Best Practice™ system.

Magnaclean Professional2XP Technical specification

Magnaclean Professional2XP Technical specification details

Technical specification

Canister and Lid

  • Material: Glass reinforced nylon
  • Fluid capacity: 0.22 gallons
  • Thread: Pressure thread
  • Flow configuration: Bi-directional – any port can be inlet
  • Main lid seal: EPDM

Magnet

  • Housing: Stainless steel
  • Length: 855/64"
  • Diameter: ¾"

Bleed Valve

  • Body material: Nickel plated brass
  • Screw: Nickel plated brass
  • Thread interface: Metric M6
  • Seals: EPDM

Drain port

  • Drain plug material: Nickel plated brass
  • Drain plug thread: Metric M8
  • Seals: EPDM

Triple seal valves

  • Body material: Nickel plated brass
  • Seals material: Long life PTFE ball seals
  • O ring material: EPDM 70 seals x 3
  • Valve inlet/outlet: 1" compression
  • Valve inlet/outlet (with adapters): 1¾" NPT female
  • Valve to canister: EPDM

Magnaclean Professional2XP Installation

Magnaclean Professional2XP Technical installation details

Installation

The MagnaClean® Professional2XP has been developed by the industry leading and multi-award winning company that pioneered magnetic filtration. ADEY’s filters protect over three million heating systems throughout Europe removing virtually 100% of the damaging suspended black iron oxide sludge that builds up in all hydronic heating systems.

The x-treme performance dual-action filter can be installed anywhere on the main circuit. However, to achieve the best level of protection for the boiler or baseboard, it is recommended that MagnaClean Professional2XP is installed after the last radiator and before the boiler.

The following instructions are designed to support engineers in the safe and effective installation and servicing of MagnaClean Professional2XP and should be followed at all times.

For help please refer to the FAQs or call ADEY toll free on 844 378 0442.

Pro2xp Installation Diagram 1
Pro2xp Installation Diagram 2
Pro2xp Installation Diagram 3
Pro2xp Installation Diagram 4
Pro2xp Installation Diagram 5
Pro2xp Installation Diagram 6
Pro2xp Installation Diagram 7
Pro2xp Installation Diagram 8

Magnaclean Professional2XP Servicing

Servicing

Pro2xp Servicing Diagram 1
Pro2xp Servicing Diagram 2
Pro2xp Servicing Diagram 3
Pro2xp Servicing Diagram 4
Pro2xp Servicing Diagram 5
Pro2xp Servicing Diagram 6
Pro2xp Servicing Diagram 7
Pro2xp Servicing Diagram 8

Magnaclean Professional2XP - Multiple installation

Customizable installation options explained

Customizable installation

MagnaClean® Professional2XP’s in-line design and 360° rotational valves provide multiple installation options for both vertical and horizontal pipework. This ensures greater flexibility within the tightest working environments.

Multiple installation options breakdown

Downloads:

MagnaClean Professional2XP sales flyer MagnaClean Professional2XP installation and servicing guide

Associated products:

MagnaCleanse® | ADEY Best Practice™ | Water Test Kits | MC1+ | MC3+

Information

For further information, water treatment advice, or information on the MagnaClean filter range call toll free on 844 378 0442 or email us via the contact us page.