Once sludge and scale build up in your hydronic heating system, it’s only a matter of time before they lead to a dramatic drop in efficiency or expensive damage. MC3+™ loosens these harmful elements allowing them to be flushed from the system.
High performance MC3+™ RAPIDE from ADEY®, the makers of the market leading MagnaClean® filter, removes both system corrosion and limescale deposits.
MC3+ can be used to complement the system-saving performance of your MagnaClean filter by dosing directly into the MagnaClean canister, or via the radiator or the expansion tank.
For complete hydronic heating system care, MC3+ should be used as part of ADEY's five-step Best Practice process. Step 1, clean, uses MC3+ to dose the system as prior to the MagnaCleanse® system flush to help remove sludge, debris and scale.
One bottle of MC3+ treats up to 33 gallons. Introduce MC3+ to the system via the purge and fill point or radiator using a suitable injector, or via a MagnaClean filter. For open vented systems MC3+ can be added via the expansion tank, remembering to remove sufficient water via the drain-point to ensure MC3+ enters the system circuit. Clean system using ADEY MagnaCleanse and MC3+. Following the cleanse, drain and flush thoroughly until the water runs clear. Refill the system and add the correct dosage of MC1+ for the optimum protection against corrosion and limescale.
ADEY is a carbon neutral company and cares about the environment. MC3+ is classified as non-hazardous and while delivering effective removal of corrosion and limescale deposits is non-toxic and biodegradable.
EN 9001 & ISO 14001
Keep out of the reach of children. Not to be taken internally. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.